The main parameters, equipment
One, equipment name and number
1, the device name 16 groups of through type steel structure of automaticsandblasting machine
1 sets of 2, the number of
Two, equipment use and installation location
1, use type rust steel surface treatment
2, the installation site construction steel structure Co. Ltd. - Tianjin factory
Three, the main technical parameters
1, the length of the whole 49 meters
2, the height of < 9.5 m (ground 0 above, this height refers to the equipment in the workshop height)
3, of 60 tons burden
4, maximum clearing member size (length * width * height) 12000 x 2400 x 3500mm
5, shot blasting machine (polishing head) set of assembly manufacturing, beltwheel transmission device
The number of 16
The motor power is greater than or equal to 15kW, the top side, bottom is greater than or equal to 18.75kw
Projectile velocity is greater than or equal to 78m/s
6, cleaning type
The main cast welding structure using 12mm steel plate, steel chamber body,throwing all indoor high chromium wear-resistant cast iron shield protection.
The auxiliary chamber body with 6mm common plate, indoor hanging 8 rubbercurtain (6 mm thickness) to prevent the ball pops up, with a steel ball sand material recycling device.
6mm common plate with the purge chamber body, the length of 2500 mm L, the steel ball sand material recycling device
7, the belt conveying device
Belt material selection of wear resistant rubber material
Rotary detecting device
(1) the belt conveyor export recovery device * 1
(2) the belt conveyor entrance recovery device * 1
(3) the belt conveyor body export recovery device * 1
(4) the belt conveyor body entrance recovery device * 1
(5) the belt conveyor hoist recovery device * 1 5HP (3.75KW) * 1/30 * 1
3HP (2.25KW) * 1/30 * 1
3HP (2.25KW) * 1/30 * 1
3HP (2.25KW) * 1/30 * 1
5HP (3.75 KW) * 1/20 * 1
The recovery rate of more than 200t/h
8, bucket elevator size 1000 wide by 600 high 11600 mm
Rotary detecting device
Power 15HP (11.25kW) * 1/10 * 1
The attachment operation detecting device, tension device
The hopper material selection of wear resistant materials, the opening of the hopper to strengthen
Lifting capacity of more than 210t/h
9, shot sand separator
Screening separator spiral 10HP (7.5KW) 1/20 * 1 stage reducer
Type winnowing
Processing amount greater than the amount of processing machine upgrade
Manually opening and closing valve accessories
10, sand supply and sand quantity control device for cylinder automatic control switch, manual screw adjusting ball quantity, operation panel indicator
11, dust removal system
The form of bag type automatic pulse blowback
Air handling of static pressure: 300mmAg = 250m/min
Fan power 60HP (45KW) * 1
The way of discharge chimney emissions of silencer
12, the main cast chamber and a conveying roller roller full use of high chromium cast iron wear-resistant plate protection, quantity 7 branch
The chamber body length is greater than or equal to 4000 mm
Roller diameter greater than 210 psi mm (alloy tube)
Conveyor speed is 0.2 ~ 5m/min (VVVF)
Roller spacing from 700 to 800 mm
13, the auxiliary chamber and a conveying roller
The chamber body length of 7500 mm and 7500 mm, import, export
Roller diameter greater than 210 psi mm (alloy tube)
Conveyor speed is 0.2 ~ 5m/min (VVVF)
Roller spacing from 700 to 800 mm
Roller power 15HP (11.25KW) 1/100 2 group
14, the purge chamber and the roller
The chamber body length 2500 mm
Roller diameter greater than 210 psi mm (alloy tube)
Conveyor speed is 0.2 ~ 5m/min (VVVF)
Roller spacing from 700 to 800 mm
15, the upper and lower conveying roller
The feeding roller length 15000 mm
Feeding roller length
1 groups of 10 meters long funnel ball recovery device of 15000 mm
Roller diameter greater than 210 psi mm (alloy tube)
Conveyor speed is 0.2 ~ 5m/min (VVVF)
Roller spacing from 700 to 800 mm
Roller power 15HP (11.25KW) 1/100 2 group
16, derusting grade Sa2.5
17, the whole machine power less than 393kw
18, the equipment noise outside the wall 1 meters less than or equal to 75dB
19, dust emissions 75-80mg/m3
