Wuxi Jinying Automation Equipment Co.,Ltd
ADD: Room 1706 of Modern international industrial design building NO.801 Hongqiao Road ,Binhu District ,Wuxi city ,Jiangsu Province ,China
TEL：0510-85858805
0510-85858808
Service：0510-85858815
FAX :0510-85556577ext802
|
|
|
|
Products
|
Location：Home--Products |
FSDH4040-金伯利起重設備| FSDH4040 | | |
Specification FSDH4040.
1.Workable area 4000mm*4000mm.
2.Spindle Quantity:1-2 .
Processing capacity:
Hole size: 14.1-75mm (target drill 100 mm),
MAX. thickness 300 mm .
Spindle power could get high torque with low speed with vector type.
Spindle clamping force 1520 kg.
Apply BT50 solid type tool rod.
Spindle up and down power is adopted by servo feed, drive by STAR ball screw and guide rail.
Spindle speed is up to 6000 mm/min, Spindle RPM3000
3. Transmission structure:straight knot, avoid no belt drive disadvantage of poor precision
Servo feed select Japan Mitsubishi servo motor and precision reducer mechine.
X, Y axis has its own pulse, the motor synchronous monitor, receives and correct pulse synchronization.
4. Transmission way
X, Y, Z three axis adopt Germany STAR ball screw, linear guide rail and slide block
Four row ball groove has good strength and high positioning accuracy
Low friction can maintain long-time accuracy
Affordable four directions high load capacity
Suitable for high speed application
Walking roller retainer is designed for smooth degree
Low noise, good lubrication effect
5. Control system with function of wireless remoted control
Two spindle automaticly analysis the best drilling efficiency and sorting, without artificial time-consuming calculation
Source of drilling graphics: DXF (automatically sort or artificially)
Drilling window can see drilling graphics
Revere drilling
Online service will be provided by on-site real-time according to field mapping function.
When drilling large plate, A, B, C, D four corner points first run, and the operator will confirm them again
Drilling can be set arbitrary combinations, such as drilling, delay, up, down... And so on, there are 99 kinds of different actions, and stored in the controller, users select anyone at any time
Drilling can position directly, unnecessarily back to the origin, it doesn't have to return to zero when run again.
Function of pause: unlimited pause time range
Function of emergency stop
Function of program run | | [返回] [打印] |
|
|
|
|
